澳门威尼斯现金网

等特种车辆设计、开发、销售于一体的大型综合现代化企业。 A large modern enterprise specializing in the design, development and sales of special vehicles such as cranes, small and medium-sized cranes, car cranes, and cranes .

News Center

What happens to 12 tons of crane hydraulic overheating

hit count: Updated: 19/04/17 09:52:04 Source: lvbenpack.com [ close ] share:
    The crane is relatively flexible to operate and will be used in many construction projects. It also brings a lot of convenience to the construction. What happens if the hydraulic pressure of a 12-ton crane is too hot?
    1. The 12-ton crane is thermally deformed, and moving parts with different thermal expansion coefficients in the hydraulic components are jammed due to their smaller clearances, causing malfunctions and affecting the transmission of the hydraulic system, resulting in poor working quality of the components.
    2. Accelerate the oxidative deterioration of the oil, and precipitate the asphalt material to reduce the service life of the hydraulic oil.
    3. Reduce the viscosity of the oil, increase the leakage, the volumetric efficiency of the pump and the efficiency of the entire system will be significantly reduced. As the viscosity of the oil decreases, the oil film of moving parts such as slide valves becomes thinner and is cut, increasing frictional resistance, resulting in increased wear.
    4. Distorting the rubber seals of the 12-ton crane, accelerating aging and failure, reducing sealing performance and service life, causing leakage. Editor: A